Leaf Skeletons

Leaf Skeletons Final 2

A little while ago you may recall that we did some MAD SCIENCE in the kitchen and created our own washing soda.  Well, today, I’m gonna tell you what I made it for: skeletonizing leaves.  I found some ancient leaves while walking in the park a few months ago, and they had been rotting for so long that only the skeleton of the veins remained.  Two of them were complete enough that I took them home and stuck them in a book to keep.

IMAG0125

Then I reasoned that, if you could buy leaf skeletons in craft stores (dyed all sorts of colours), that it must be relatively simple to speed up the natural decomposition process, right?  Well, yes.  And the internet came through.  The easiest instructions I got came from The Idea Room, though I didn’t end up cooking my leaves for as long (because mine were much thinner, I think).

IMAG0128

So anyway, here’s what you do.  Step one: go outside (it’s okay, you can do it).  Step two: pick up some leaves that you like.  Greener ones are better the ones that have already changed colour, just because they’re less brittle and usually more complete.  You will likely have some that you think will work perfectly and they fail in a spectacular manner.  I tried this with some smoke bush leaves, a large hosta, and some grasses and they did not work at all.  Elms, ashes, oaks and maples seemed to work out best for me, but those are the sorts of trees that grow in my area.  If you’ve got some different climate going on in your neck of the woods, then feel free to experiment!

Leaf Skeletons First Test 1

Take a large pot, and dump a handful of your leaves in the pot, so that they’re all lying flat (they can lie on top of each other, just not crumpled up).

Leaf Skeletons First Test 2

Dump 3/4 cup of our handy dandy washing soda on top of that.

Leaf Skeletons First Test 3

Dump 4 cups water on top of that. You’ll likely need more water as it evaporates, but if you’ve got a glass lid for your pot you can peek in and minimize steam loss that way.

Leaf Skeletons First Test 4

Bring that pot to a boil and then reduce it to a simmer and just let ‘er rip for a while. Your leaves will undergo quite the transformation, from something like this:

Leaf Skeletons First Test 6

through this sort of “tea-like” stage:

Leaf Skeletons First Test 7

to this icky stage:

Leaf Skeletons First Test 8

That’s about when you can consider most of your leaves as being done. For my leaves, with their relative thicknesses, it was between 45 minutes and 75 minutes. Use a large flat spatula or slotted spoon to carefully transfer your leaves, one at a time, into a flat dish filled with warm fresh water. You can see that this leaf has already started to come apart.

Leaf Skeletons First Test 9

Be very careful as you transfer them because they are fragile and will do everything they can to tear on you.

Leaf Skeletons First Test 10

Using a soft toothbrush or a very soft small paintbrush, give your leaf a little scrub to gently wipe away the leaf material from the skeleton. On some leaves, you’ll find this easier if the leaf’s surface is face up; on others, it will be easier when the leaf is upside down. Sometimes you’ll want to go with the “grain” of the veins, and other times you’ll want to do something different. There’s definitely a process of trial and error.

Leaf Skeletons First Test 13

If you are doing more than one leaf, make sure you are comfy — this takes a while.

Leaf Skeletons First Test 14

When your leaves are skeletonized to your preference (just remember that the longer you boil them the more fragile they will get), transfer them to a paper towel to dry. I would recommend weighting them as they dry as well. I didn’t do it for this one and you can see that it wrinkled when it dried out.  It’s a simple matter, however, to re-wet them and bung them in a book for later.

Leaf Skeletons First Test 16

So this is the large maple leaf I did with the washing soda. You can see that it’s not as complete a skeleton (there’s still some tissue remaining) as the one I picked up in the woods in our opening shot at top here.

Leaf Skeletons Final 1

Here’s the two next to each other:

Leaf Skeletons Final 11

This one, despite some tearing, turned out really neat, as I only brushed out one half of the leaf:

Leaf Skeletons Final 3

You can do whatever you want with your skeleton leaves. I saw a bunch of projects where artists had dried them into the shapes of bowls and other things, but I ran out of sucessful leaves before I had enough to make a bowl, so I decided to do the simple thing and just frame them. I got these floating frames from Michaels and DeSerres.

Leaf Skeletons Final 4

Leaf Skeletons Final 6

They make a great housewarming or host/hostess gift, or feel free to keep them for your own personal use.

Leaf Skeletons Final 7

Leaf Skeletons Final 10You can also bleach the leaves if you want them to be whiter, or you can dye them using food colouring.  Really, the possibilities are endless.  I’ve also seen them pasted to the outside of hurricane lanterns to act as luminaries, and used in scrapbooks.  What would you do with them?

Going Postal

Going Postal

You may recall that in the spring I acquired several envelopes of vintage postage stamps once belonging to my great grandfather and I was casting about, trying to figure out what to do with them.

In the interim, my dad found some more of them in a filing cabinet, and now I have lots.

Going Postal 1

It took me a good hour to sort them from his weird Scottish code to something that I could understand.

Going Postal 3

And now I’m going to show you two things I did with them.  I’m sure I’ll do more in the future.

The first idea I had was to enlarge two of the stamps I liked very much.  To do this, I took a close-up photo of each using my macro lens and some bright light.  I was originally going to scan them instead, but I found they lost a lot of their depth that way.

Going Postal 5

This is my improvised light box: a bright window, a white sheet of board, and a clean surface.

Going Postal 4

I touched up the images to improve the contrast and remove imperfections. I love the sheer size of my new computer screen for doing this. No more sticking my nose to the screen!

Going Postal 6

After alterations:

Going Postal 7

So here are the two I want to blow up. The mountain goat:

Mountain Goat 1956

And Expo 67.  You can see that by taking a photo instead of scanning you can pick up the slightly raised red ink on the expo67 and the 5.

Expo 67

Then I had the Pie take the images to our university’s printing services and he came home with these nice big printouts.  I bought a special pair of scrapbooking scissors at Michael’s that resembles the edges of a postage stamp, so I cut out the stamp image to look like a giant stamp.

Going Postal 2 1

Then I simply inserted it in a photo frame of the appropriate size and shape.

Going Postal 2 2

This extra one is for Rusty, because he’s an ice maker (and does curling ice), so I thought he would like it.  Three stacked one on top of the other I think makes the colour contrasts stand out nicely.

Going Postal 2 13

The other thing I did involved a stamp series, which I simply placed in a collage on black paper (for contrast) and inserted in the frame.

Going Postal 2 10

This is actually two series together, both of Queen Elizabeth, both representing certain elements of Canadian culture and industry.

Going Postal 2 12

For added interest, I did a little research on each stamp (Collections Canada has a comprehensive list) and printed out the information to accompany each framed picture.