The Canadian Car Poncho

Car Poncho 32

There’s the idea that you shouldn’t put your kid in a big puffy snowsuit in their carseat because the snowsuit doesn’t allow you to do up the straps as tight as they need to be and that could be unsafe if you were to get into an accident. Accordingly, they sell these things called “car ponchos” for small children, and they’re all fancy with faux fur trim and buttons and snaps and zippers and whatnot and they cost like SEVENTY BUCKS. Seriously? Eff that. Also, this is CANADA, and here it’s always colder than it is in other places. So most of those fancy car ponchos are wayyy not warm enough to combat that howling wind when it’s minus twenty.

Car Poncho 2

I figured, seeing as I’m doing all this sewing these days, why not make my own? At the fabric store near us, fleece is pretty expensive, usually about $7 a metre, but at IKEA, you can pick up a POLARVIDE fleece blanket for $5.99, and they’re almost 2 metres. They come in a variety of colours depending on the store and the season, and sometimes they go on sale and they’re even cheaper. I picked up two, for layering.

Car Poncho 1

FOR THE LAZY: Just use one blanket. Sewing two together is less than easy.

One side of the fleece has little round flibbety things that stick out, so I cut them off using my rotary cutter.

Car Poncho 4

FOR THE LAZY: Leave ’em on.

Then I went through a million permutations of how to layer the blankets together so that the raw edges were inside the blanket. But it was much too complicated for me so I just folded each in half on the short edge and flipped them so the folded edge of one blanket was against the open edge of the other.

Car Poncho 5

FOR THE KEENERS: Sandwich the open edges inside so that the folded edges show on both sides.

Then I started sewing the blanket together, starting with a straight line right down the middle, followed by another that bisected it perpendicularly.

I kept going, dividing each un-sewed section in half and sewing through it, then I sewed around the edge. I did this to keep the different layers from bunching around each other. Four layers of fleece is hella bulky and it was really tricky with my little pink machine.

Car Poncho 6

FOR THE KEENERS: Maybe try a bias binding on the outside edge, or sew your lines radiating out from the centre at angles.

So now I have this big bulky blanket with four layers of thin fleece all quilted together. I need a head hole in the middle.

Car Poncho 7

Here I am doing a very scientific measurement of LongJohn’s head diameter using a salad plate. It’s a little big, but babies heads grow alarmingly so I know it’s better to go too big here than too small.  If you’ve ever tried to shove something too small over an angry baby’s head then you know what I mean.

Car Poncho 8

Car Poncho 9

Then I used the salad plate as a guide for cutting out the centre hole.

Car Poncho 10

I waited until everything was sewn together before cutting out the hole because I knew I wouldn’t necessarily be able to line up all four holes properly if they weren’t already permanently stitched in place.

Car Poncho 11

I’m trying to figure out what to do with the circle I have left. Any ideas?

The resulting hole was a bit jagged (cutting through four layers of fleece at once with a circular blade is also less than easy). But it was easily tidied up with a pair of scissors.

Car Poncho 12

Then I had to consider the hood. I was considering not doing a hood but babies don’t wear scarves and I didn’t want LongJohn’s neck all exposed to the elements, especially seeing as the head hole was so big.

The VITMOSSA blanket, also from IKEA, is only $2.99. It’s a thinner fleece with a bit of stretch, and I figured that if I doubled it, I’d get a decent flexible hood.

Car Poncho 13

I measured a distance of slightly over half the way around the circle and I cut a length of the blanket accordingly.

Car Poncho 14

The idea here is that if I fold the piece over itself, the seams line up and the hood forms naturally.

Car Poncho 15

Car Poncho 16

Because I want this thing to be reversible, I opened up a few of the centre seams in the poncho so I could sew the hood into the space in the middle.

Car Poncho 17

Then I folded the rectangle that I cut out in half across the short side again. Inside-out.

Car Poncho 18

And sewed up the two open sides perpendicular to the fold.

Car Poncho 19

Turn it right-side out and then line up the two seams.

Car Poncho 20

Tada, a hood! It has a pointy top so I would not recommend making this out of white fleece, if you know what I mean. Just to be politically correct.

Car Poncho 21

FOR THE KEENER: Sew down the pointy top.

Then I pinned it into the head hole of the poncho.

Car Poncho 22

You can see here that it fits between the two colours of fleece.

Car Poncho 23

Pin, pin, pin.

Car Poncho 24

The hard part here was now sewing the hood into the poncho (that’s six layers of fleece, if you’re counting). I had to shove so much bulky blanket through the little arm of the sewing machine. And then rotate it as I went around in a circle. Slow and steady was the best course of action here.

Car Poncho 25

Once finished, you can see how it works on the gray side …

Car Poncho 26

… and on the red side. I actually had to go around on the red side again because I’d missed a layer in my excitement.

Car Poncho 27

FOR THE LESS LAZY THAN ME: Be more careful and get all the layers sewed at the same time.

And now the test on my model.

Car Poncho 29

As you can see it’s roomy in the neck at the moment but I can always pin or clip that closed for now. He’ll fill out soon enough. He’d wear the poncho like this when I was carrying him or he was walking around. Which hopefully is far distant in my future.

Car Poncho 28

Then here he is in his high chair, which is standing in for the carseat (because it’s freaking cold outside today and I’m not going outside just to take a picture for you guys). The back of the poncho flips over the back of the car seat and the front part can be twitched aside while you do up the straps snugly against your little one. Then you just tuck it back down again and your kidlet is warm and snug!

Car Poncho 31

I’m making another one for a friend with a much bigger baby (makes a great gift!) and I’m confident my head hole size (22cm diameter) will be entirely appropriate. I also have enough left of the VITMOSSA blanket to make a thinner, warmer-weather poncho too!

Car Poncho 30

Happy Thanksgiving!

Happy turkey day!  In Ottawa today it is absolutely beautiful, so I hope your day is going as well as mine is.

Centrepiece

And guess who arrived yesterday morning?

Izod's Birthday 35

This is Izod, only a week behind schedule.  Everyone is well and happy, which is another thing to be thankful for.  Enjoy your weekend!

Sewing so easy even I can do it: Nursing Shawl

Nursing Shawl 18

Okay so it’s official: I’m going to be an aunt (again).  This time, though, unlike my lovely instant nieces Tego and HG I get to meet this niece or nephew at birth!  Krystopf and Atlas, the expectant parents, are coming to visit at the end of May.  It’s my big brother’s first time in Newfoundland, though Atlas was here back around the time of Doodle’s Newfoundland Express.  And neither Atlas nor I will let Krystopf forget the fact that SHE bravely came to visit us (by herself!) when she was a just brand new girlfriend, and HE (my own eldest brother) can’t organize himself enough to book a flight.  But for reals now they are coming and I couldn’t be more excited!  It’s a very brief trip but we’ll be sure to cram it with all sorts of fun stuff.

Nursing Shawl 15

While I fully plan to have their wedding present (from last July) finished before they get here,  I thought I would also get cracking on some baby-related things they might find useful in the near future (the baby is due in October).  Now we know that if you put me in front of a sewing machine I am likely to break it.  Like for real.  But this one I think I can handle, because it involves sewing precisely one line.  Even I can do that.  I hope.  Anyway, this post also kicks off my new Kidlet category here at Ali Does It.  Who says you can’t do it yourself when there’s children involved?

Nursing Shawl 14

What we’re going to make today is a nursing shawl, and it’s so simple it’s almost stupid.  But the great thing about this shawl (I think) is that it’s an easy (and fashionable) alternative to nursing bibs and trying to gather blankets around your shoulders and whatever.  And it covers your back, too, like a stylish poncho.  And it’s small enough you can just jam it anywhere in your bag.  And it doesn’t wrinkle.

Start off with some fabric, a nice jersey knit.  I found two that I liked, this pink cotton and then a silky gray polyester blend.  They were $2.99 a metre, which struck me as a good deal.

Nursing Shawl 1

After washing and drying the fabric (to remove sizing and get any shrinkage out of the way), fold the fabric right-side-in along its width (which should be about 60 inches (or about a metre and a half).  This will leave you with something about 30 inches wide.

Nursing Shawl 2

Because fabric stores cut this stuff very quickly, the edges are not exact.  I lined mine up as best I could and then used some sharp sewing scissors to cut along the outer edge to make it more square.

Nursing Shawl 6

Next, use a measuring tape to measure 25″ from the outer edge and pin several times to mark your place. This will run perpendicular to the folded edge.

Nursing Shawl 4

Cut along your markings so you are left with a rectangle that is about 25″ x 30″ (or 25″ x 60″ if you unfolded it).

Now you’ve got one folded edge and three open edges, right?  From one corner of your folded edge, measure 13″ along an open edge and pin to mark it.  This will be the head hole for your shawl.  Pin along the rest of the fabric to hold it in place.

Nursing Shawl 7

Nursing Shawl 5

Now all you have to do is sew along that line, from the edge of the head-hole to the end of the fabric.  It’s only 17″ of sewing.  Of course, my sewing machine and I don’t get along.  And so rather than throw it across the room I just did these by hand with a needle and matching thread and it took no time at all.

Nursing Shawl 8

Then you just flip them right side out and they’re done.  Jersey knit doesn’t fray so you don’t have to worry about hemming the other sides (though you can if you want to, or embellish them with ribbons or whatever you would like).

Nursing Shawl 9

It’s a nice comfortable, breezy fit!

Nursing Shawl 19
At this point, Fussellette laughed and said, “I’m not fit yet for motherhood.”

Nursing Shawl 22

Thanks to Fussellette and Teddy Two for being my models!

Nursing Shawl 16