Laundry Loft Part One

My entryway is a mite crowded.  You have to stand up on the bottom step in order to open the door without interference.  I’m still amazed that we moved in all our furniture up that narrow flight of stairs.

This is also my laundry room, and I’m definitely feeling the lack of space.  You can see how the washing machine comes right to the door jamb.  I like to keep my potting soil and grass seed on top of the dryer.  That box of kleenex has been there since my parents visited in October 2008.

But if you look up, there’s so much space that I could be using.  Of course, I’m not ten feet tall so I’ll be limited in what I can do, but at the very least there needs to be a shelf up there.  I tried storing things like laundry detergent on top of the dryer, but the vibrations knock it to the floor within a day.  The potting soil has stayed there simply because it’s flat and heavy.  Anything else would be on the ground.

I’ll have to be careful of the fuse box, which you can see on the right side of the above picture.  The door of the box doesn’t open all the way because of the laundry.  Again, it’s a tight space.

The point of this particular project is to see if I can do it through scavenging alone.  I have a huge shed where my landlord’s contractor stores all his stuff.  I am determined that there are scraps in there good enough for what I’m intent on doing.

You’ll notice that the paint job in the entry way is the same horrible beige we eradicated throughout the rest of the house.   The ceilings are just too high for us to get the job done.

The plan is to lay a piece of wood so it sits about 6 inches above the top of the dryer and can be removed easily for maintenance purposes.  Because I don’t want large brackets to interfere with the dryer space I am going to prop the shelf on two pieces of wood that will be attached to the wall and will run flush to the wall along the depth of the shelf.  These will save me the space I need and will mean that I can just pop the shelf down whenever I need to.  I’ll put some small scraps running perpendicular to the wall-wood, just at the back, to prevent me from pushing the shelf backwards off its runner.

The shelf itself needn’t be super heavy duty.  All I plan to use it for is a repository for my one jug of detergent and maybe a box of Borax.  No biggie.

I need a piece of wood that is no less than 34″ (the width of the entryway).  This could be tricky.

Fortunately, Kª has volunteered the destruction of this changing table which is taking up space in the garage.As the both of us are of the school that the lower to the ground you change your baby the smaller the distance he can fall, this changing table is only gathering dust and mildew and Kª is thrilled that it can be repurposed to something else.

It looks like it’s a basic IKEA-style construction, so dismantling won’t be a big deal.  I measured and the long horizontal pieces of fibreboard are just barely 34″.  The vertical end pieces, however, are about 36″, so if I can cut the fibreboard carefully enough so it doesn’t splinter, then I can use those as well.  At least I have four different pieces of wood to screw up.

As for the ‘brackets’ that will hold up the shelf itself, I need two lengths of small-gauge board, preferably of a 2″ thickness, and about 14″ long.  There is a ton of that in the garage, and I’m sure it wouldn’t be missed.

These pieces are about twelve feet long.  The middle one is probably the ideal size for my job.  I’ll make use of it if my conscience doesn’t smite me.  I’m sure no one would miss it if I took two feet off it.  I had to unearth it from a dusty pile in order to put it on that rafter so I don’t think anyone will notice.

These pieces are less ideal.  They’re a bit narrow, thickness-wise.  I need something that the shelf can balance on securely that will distribute some of the weight.

These pieces are ones that I know nobody would mind me using, as they’re obviously remainders from other things (I used one of these to create the reinforcement on my fireplace door to keep out the mouse).  They’re even less ideal, being of varying lengths and thicknesses.  They are a last resort, for sure.  Although that little stack of squares might be useful to me.  I hadn’t seen those before in the scrap pile.  I’ll have to think about it.

Now I’m just being silly.  Though it might be interesting to see if I can make some outdoor pot stands and things from this stuff.  It’s not like any of the fireplaces in our house actually work.  What use is a whole wall of firewood?

Anyway, that’s the plan.  If I can get two days running of good weather I’ll start working on it.  In the mean time I need to pick myself up a stud finder and some nice long wood screws.  I will keep you posted.

Author: allythebell

A corgi. A small boy. A sense of adventure. Chaos ensues.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s